SURFACE STRESS METER
概述:The Surface Stress Meter is designed for measuring compression stress of tempered glass.It makes the light spread along the surface of glass and then the value of surface stress and depth wi
本信息已過期,發布者可在"已發商機"里點擊"重發"。
SURFACE STRESS METER FOR TEMPERED GLASS(REF.ASM-100-3)
The Surface Stress Meter is designed for measuring compression stress of tempered glass.It makes the light spread along the surface of glass and then the value of surface stress and depth will be tested through photoelastic principle.Computer equipped will be used to reduce measurement error caused by operator and also be available for data management.In addition,automatic titrator and thickness gauge are in option to achieve efficiency improvement.
FEATURES
■peculiar Measurement Principle-Photoelastic Analysis Refractormeter
■automated testing reducing errors caused by operators
■computer to save data for quality control
■manual testing available when samples are not in good tempered condition
■LED lamp with 10000 hours serving time
■Master Piece to achieve system self-calibration.
■automated determination of qualified or unqualified according to operators’ setting while continuous testing in progress
■data saved and testing times displayed immediately while continuous testing in progress
■single and manual measurement in option
■automated Immersion Drop Function controlled by specific software to reduce Immersion liquid cost
SPECIFICATIONS
Stress Measurement Range(Mpa): 1-1000
Stress Measurement Accuracy(Mpa): ±20
Depth Measurement Range(μm): 0-200
Depth Measurement Accuracy(μm): ±5μm
Measurement Object: chemically and physically tempered glass
Measurement area(mm): ≥12*7
Measurement principle: Photoelastic Analysis by Refractormeter
Source of Light: special LED(with wavelength 590nm±10)
IR of Prism: 1.72
PC: special OS & software(installed)
Software: special software ASM-100-3
Power: AC220V 3A
Air Source(Mpa): 1(clean air)
Weight(Measuring Head)(Kg): about 14
LIST
■Measuring Head: 1 set (ASM-100-3)
■Prism(12*7mm): 1 set (installed on Measuring Head)
■Computer(DELL): 1 set
■Dongle: 1 set (inserted in computer)
■ASM Measurement software: 1 set (installed on computer)
■Immersion Liquid: 20ml
■Master Piece: 1 set
■XP OS
■Manual: 1 set in Chinese Version
■Liquid Titrition: 1 set
[本信息來自于今日推薦網]
The Surface Stress Meter is designed for measuring compression stress of tempered glass.It makes the light spread along the surface of glass and then the value of surface stress and depth will be tested through photoelastic principle.Computer equipped will be used to reduce measurement error caused by operator and also be available for data management.In addition,automatic titrator and thickness gauge are in option to achieve efficiency improvement.
FEATURES
■peculiar Measurement Principle-Photoelastic Analysis Refractormeter
■automated testing reducing errors caused by operators
■computer to save data for quality control
■manual testing available when samples are not in good tempered condition
■LED lamp with 10000 hours serving time
■Master Piece to achieve system self-calibration.
■automated determination of qualified or unqualified according to operators’ setting while continuous testing in progress
■data saved and testing times displayed immediately while continuous testing in progress
■single and manual measurement in option
■automated Immersion Drop Function controlled by specific software to reduce Immersion liquid cost
SPECIFICATIONS
Stress Measurement Range(Mpa): 1-1000
Stress Measurement Accuracy(Mpa): ±20
Depth Measurement Range(μm): 0-200
Depth Measurement Accuracy(μm): ±5μm
Measurement Object: chemically and physically tempered glass
Measurement area(mm): ≥12*7
Measurement principle: Photoelastic Analysis by Refractormeter
Source of Light: special LED(with wavelength 590nm±10)
IR of Prism: 1.72
PC: special OS & software(installed)
Software: special software ASM-100-3
Power: AC220V 3A
Air Source(Mpa): 1(clean air)
Weight(Measuring Head)(Kg): about 14
LIST
■Measuring Head: 1 set (ASM-100-3)
■Prism(12*7mm): 1 set (installed on Measuring Head)
■Computer(DELL): 1 set
■Dongle: 1 set (inserted in computer)
■ASM Measurement software: 1 set (installed on computer)
■Immersion Liquid: 20ml
■Master Piece: 1 set
■XP OS
■Manual: 1 set in Chinese Version
■Liquid Titrition: 1 set
[本信息來自于今日推薦網]

- ptc0426發布的信息
- 偏光片吸收軸量測儀OI-OAM
- 偏光膜光軸測量儀是一款專門測量偏光膜吸收軸角度的儀器。測試時采用手動放置偏光膜的方式,可對偏光膜吸收軸角度進行單次測量和多次連續測量,并實時顯示測量結果。并可保存可保存大量測試數據,具備數據查詢,光軸角度分布分析、數據報表導出等功能。...
- 玻璃強化應力檢測儀標準片S-701
- 只適用于應力儀分析濾波器的光遲緩旋轉度和光源需要知曉的情況 檢測光遲緩率是獨立于使用的光的波長之外的....
- 塑料光盤退火應力檢測儀S-600
- 該款雙折射應力儀可以用光雙折射法快速準確的檢測出未經加工的透明光盤。 該款儀器使用方便,測量速度快,并且方便攜帶。 鈉燈和白光燈放置于有風扇冷卻裝置的燈箱內。 該款儀器測量精度為±1.6NM 使...
- ptc-413定量應力儀
- 應力儀PTC-413 適用范圍:適合于檢測燈等有復雜構造的產品,檢測高密度的塑料產品,如隱形眼鏡等。檢測光學晶體,如氟化鈣等。 型號 PTC-413 尺寸 W280×D375×H410mm 重量 10Kg 測樣有效長度 W200×...
- 塑料定量應力檢測儀PA-100
- PA100的主要性能 1.應力圖像的分布 應力豎軸方向等大范圍內的應力分布, 可以通過圖像來保存 2.應力的表格顯示 任意兩點之間的雙折射的圖像分布, 可以通過表格形式進行保存 3.范圍分析 任意四角或...
- 玻璃二次元尺寸測量儀PDSM-2
- PDSM-2快速二次元通過顯微放大原理進行高精度、快速的平面工件尺寸測量。通過適當增減相機的數量,可以對平面工件的關鍵特征點之間的平面位置關系進行精密測量。同時,使用計算機進行數據測量,便于測量數...