GOTS認證輔導，紡織品機械加工和制造操作及其產品的認證
概述：GOTS認證公司費用，GOTS驗廠認證步驟流程，GOTS認證證書
本信息已過期，發布者可在"已發商機"里點擊"重發"。
4
QUALITY ASSURANCE SYSTEM
4
質量保證體系
4.1
AUDITING OF PROCESSING, MANUFACTURING AND TRADING STAGES
4.1
加工、制造和貿易活動的審核
Processors, manufacturers and traders of GOTS Goods shall participate in the GOTS certification procedure
which is based on an on-site annual inspection cycle (including possible additional unannounced inspections
based on a risk assessment of the operations). They shall hold a valid certificate of compliance listing the
certified products/product categories and the processing, manufacturing and trading activities that are quali
fied under the scope of certification (including names of subcontractors assigned and their relevant pro
cessing and manufacturing steps).
GOTS 產品的加工者、制造商和貿易商應參加 GOTS 的認證程序，該認證程序是基于每年一次的定期現場檢
查（包括其它有可能基于操作風險評估確定的飛行檢查）。他們應持有列有認證產品或產品類別，以及認證范
圍內有資質的加工、制造和貿易活動（包括指定的分包單位的名稱及其相關的加工和制造步驟）的有效的合格
證書。
Exceptions for Traders and Retailers are defined in corresponding Implementation Manual.
《實施手冊》中規定了貿易商和零售商的例外情況。
Exceptions to annual onsite inspection for small-scale subcontractors with a low risk potential are possible
under certain conditions, as defined in corresponding Implementation Manual.
根據《實施手冊》的規定，在特定條件下，低風險小型分包商可免于年度現場檢查。
On-site inspection shall however be performed to such units at least for the first year and every 3rd year of
granted certification.
但現場檢查在首年度和獲得認證后的每三年至少必須執行一次。
The entity under whose name or brand the labelled GOTS Goods are sold to the end consumer is responsi
ble for exercising due care in ensuring compliance of the products with this Standard, the Licensing and La
belling Guide and further provisions as released by the Global Standard gGmbH.
若實體的名稱或商標要標注在面向最終消費者的 GOTS 產品上，則該實體需負責履行應有的監管，確保產品
符合 Global Standard gGmbH 發布的本《標準》、《許可和標識指南》以及其它規定條款。
Certifiers shall be authorised by the Global Standard gGmbH for the specific scope(s) in which they offer cer
tification services:
認證機構應就其提供的具體認證服務范圍向Global Standard gGmbH 獲得授權：
1) Certification of mechanical textile processing and manufacturing operations and their products
紡織品機械加工和制造操作及其產品的認證
2) Certification of wet processing and finishing operations and their products
濕加工和整理操作及其產品的認證
3) Certification of trading operations and related products
貿易操作及相關產品的認證GOTS Version 5.0– Page 45 of 55
GOTS 5.0 版
Basis for authorisation by the Global Standard gGmbH is an accreditation of the certifier in accordance with
the document ‘Approval Procedure and Requirements for Certification Bodies’ by the main co-operation
partner of the Global Standard gGmbH for this process, IOAS, or another recognised accreditation body.
Global Standard gGmbH 的授權是基于其主要合作伙伴 IOAS 或其他公認的認可機構按照 Global Standard
gGmbH 制定的《認證機構審批程序和要求》對認證機構實施的認可。
4.2
TESTING OF TECHNICAL QUALITY PARAMETERS AND RESIDUES
4.2
技術質量參數和殘留物的檢測
Certified Entities are expected to undertake testing in accordance with a risk assessment in order to assure
compliance with this Standard and in specific with the criteria of Section 2.4.14 (Technical Quality Parame
ters) as well as 2.4.15 and 2.4.16 (Limit Values for Residues in GOTS Goods, additional materials and ac
cessories). All GOTS Goods, the components of these products and the inputs used are to be included in
this risk assessment and therefore potentially subject to testing. The testing frequency, the type and number
of samples are to be established according to this risk assessment.
.為了確保產品符合本標準，尤其符合本標準第 2.4.14 節（技術質量參數）、第 2.4.15 節和第 2.4.16 節
（GOTS 產品、其余原料和輔料的殘留物限量值）要求，被認證實體應根據風險評估，對產品進行檢測。所有
GOTS 產品和所用投入物的成分均要納入到該風險評估當中且要執行可能的測試。測試頻率和取樣數目應根據
該風險評估來確定。
Samples for residue testing may also be taken by the inspector during the required on-site inspection, either
as back-up to the inspection process or in case of suspicion of contamination or non-compliance. Additional
samples of goods may be taken from the supply chain at any time without advance notice.
用于檢測殘留物的樣品可以由檢查員在執行所需的現場檢查期間抽取，抽取的樣品既可作為檢查過程的輔助證
明，也可以在懷疑有污染或不合格時供檢測。其它的產品樣品可在不預先通知的情況下隨時從供應鏈中抽取。
Laboratories that are accredited according to ISO/IEC 17025 or qualified to GLP and that have appropriate
experience in residue testing for textiles respective chemical inputs are approved to perform residue testing
for those tests that are under the scope of their accreditation.
本標準接受 ISO/IEC 17025 認可的、符合良好實驗室規范（GLP），且有相應紡織品殘留物測試經驗的實驗
室來實施認可范圍內的殘留物檢測。
- ctswlj發布的信息
- 羽絨廠RDS認證輔導，為什么要關心RDS責任羽絨標準認證
- 什么是責任羽絨標準，我為什么要關心？ 您知道那些超柔軟的枕頭會在您的頭部接觸到表面后下沉嗎？這些枕頭很容易被絨毛填充。羽絨通常在蓬松的夾克，睡袋，被子和枕頭中發現，以其隔熱...
- GOTS認證輔導，GOTS依靠雙重系統檢查是否符合相關標準
- 東莞助劑ＧＯＴＳ認證，佛山化工ＧＯＴＳ認證，浙江化工ＧＯＴＳ認證...
- GRS認證咨詢,GRS的目標是減少生產對人和環境的有害影響
- Textile Exchange Global Recycled Standard 紡織品交易所回收標準 Original Release Date: July 1, 2017 組織發布日期：2017 年 7 月 1 日 ©2014 Textile Exchange. All...
- RDS認證輔導，有哪些原因可以將Down視為可持續的選擇
- 什么是羽絨和羽毛？ 羽絨由從中心點長出的細絲簇組成，而沒有主軸。它看起來很像蒲公英莢。鵝，鴨和其他水禽必須保持它們的溫暖，柔軟，蓬松的底涂層。它的...
- COSMOS認證咨詢以下信息適用于有興趣提供服務的認可和認證機
- COSMOS認證輔導，COSMOS認證證書代理，COSMOS認證費用...
- CTPAT認證輔導,CTPAT驗廠在安全管理系統有哪些必須履行的
- 1 安全管理系統 1.01有否專人負責B安裝備事宜? 如有,請提供人名及聯絡電話。 必須履行. 1.02是否有書面B安政策及程序包括實體B安,門禁管理,人事B安,教育和培訓,貨柜B安,提貨單及運輸B安,出...
